Capillary and Tubing for HPLC/UHPLC

一、Product Introduction:
This capillary tube set consists of five high-quality flexible stainless steel capillary tubes, each with an inner diameter of only 0.12mm, a size that allows them to precisely control and direct very small amounts of fluid. These capillary tubes are an indispensable tool in the laboratory and are especially suitable for scenarios where precise manipulation of fluids is required, such as sample collection, reactant addition, cell manipulation, and more.

二、Product Type
1.Type A:A type stainless steel capillary tube, using 316L stainless steel, both ends of the diameter of 1.58mm (1/16 inch), the middle of the use of 0.79mm (1/32 inch), easy to bend, withstand the pressure of 1200bar, acid and alkali resistance is better;
2.Type B:Type B adopts 316L stainless steel, the diameter of both ends is 1.58mm(1/16""), the middle adopts 0.79mm(1/32""), the two ends of the capillary tube adopts the patented design of bulging, the gasket will be loaded into the capillary tube, and manually tightened to Achieve flat and side double sealing, the line is easy to bend, not easy to break, withstand pressure greater than 1200bar, acid and alkali resistance is better, while the line and the joints can be separated, separate replacement, the life expectancy of more than 150 times (use of imported column tubes and equipment).
3.Type C:C type series capillary tube, the use of 316L stainless steel, both ends of the diameter of 1.58mm (1/16""), the middle of the use of 0.79mm (1/32""), capillary tube ends to join the protection design, easy to bend, not easy to break, withstand pressure 1200bar, acid and alkali resistance is better, compared with the A series of capillary tube, the life will be longer, the disadvantage is that can only be used for ordinary short metal joints.

Compared with A and C series capillary tubes, B series capillary tubes are double sealed, compatible with all kinds of chromatographic columns and reduce the dead volume of capillary connection;

三、Product features:

1.Ultra-fine inner diameter: 0.12mm inner diameter ensures extremely high precision, which can be used to deal with micro-scale or even nanoscale fluids.
2.High flexibility: The stainless steel material gives the capillary tube good flexibility, which can be easily bent into the required shape without breaking.
3.Corrosion resistance: The stainless steel material gives it good corrosion resistance and can be used for the transmission of a wide range of chemicals.
4.Reusable: after proper cleaning and sterilization, these capillary tubes can be used multiple times, improving the efficiency of experiments.
5.MULTIPURPOSE USE: Suitable for use in a variety of laboratory environments including, but not limited to, the fields of biology, chemistry, physics and engineering.

四、Product usage
Before use, make sure the capillary tube is clean and dust-free. According to the need, the capillary tube can be cut to a suitable length by professional tools. When transferring liquids, one end can be immersed in the liquid and the principle of capillary action can be utilized to draw up the liquid. For viscous liquids or liquids that are difficult to draw up by capillary action, syringes or other auxiliary equipment may be required.

五、Product Maintenance and care:
Immediately after use, the inside and outside of the capillary should be rinsed with water to remove residual substances. For experiments where there is a risk of contamination, it is recommended that the capillary be thoroughly cleaned with an appropriate cleaning agent and autoclaved or disinfected using a UV disinfection lamp. Proper maintenance can prolong the service life of the capillary tube.

Our products can accept mass customization services, as well as free sample services, if necessary, you can contact us for further discount activities.Our products have different materials and specifications to meet the different needs of the laboratory。
We are the source factory, the production of the products is controlled by a professional production department, and the professional technical department is responsible for the final review, and the automatic production is adopted to make the products free from pollution.